Feature

1. High injection rate, which reduces internal press.
2. High output hydraulic system, it provides outstanding performance
3. Enlarged clamping stroke to meet with larger stroke requirements
4. Low noise level hydraulic circuit
5. Japanese made computer controller specially designed for injection moulding
6. Proportional power saving pressure and flow hydraulic system, which is power saving, fast cycle, low noise and low maintenance cost

Control system

1. Japanese made computer controller.(specially designed for injection moulding).
2. Fine-tuning capability of parameters during the moulding process.
3. Direct reading of the linearity pressure setting.
4. Timing parameter setting could be accurately set 1/10 sec.
5. Digital carriage forward/backward pressure and speed setting.
6. Linear potentiometer for clamping and injection stroke measurement with resolution of 0.1 mm.
7. LCD display with back light function
8. Screen saver function.
9. Data lock function prevents unauthorized access.
10. Self-diagnostic function.

Injection unit

1. Nitride hardened screw and barrel
2. Drooling and screw back pressure adjustment for high MI index material
3. Superior injection capability suitable for precision engineering plastic moulding applications
4. Twin injection cylinders ensure smooth and stable injection.
5. Digital three-stages melting pressure and speed setting.
6. Three-stage holding pressure setting.
7. Five-stage injection pressure and speed setting.
8. Injection and holding parameter can be switch over either by time or position.
9. Pivoted injection unit to facilitate change of screw and barrel.
10. Nozzle temperature control.
11. PID digital temperature control.
12. Cold start prevention.
13. Injection Malfunction automatic check
14. Injection screw directly driven by high-torque hydraulic motor with digital speed and pressure control.
15. Plasticizing speed display
16. Manual back pressure control with gauge indication

Clamping Unit

1. Digital three-stage mould opening and four-stage mould closing pressure and speed setting.
2. Heavy-duty 5 points toggle mechanism with same opening stroke, required less motion time, hence increase production rate.
3. Finite element analysis ensures mechanism rigidity of the clamping mechanism.
4. Computer aided design toggle mechanism gives optimal mould closing and opening speed profile.
5. Auto-adjustment of mechanical safety bar.
6. Single casting of toggle link on the stationary platen, which enhances rigidity of the clamping unit
7. Electric safety interlock device
8. Hard chrome plated high tensile steel tie bars
9. Hydraulic powered mould height adjustment
10. Digital low pressure mould closing protection
11. Digital pressure and speed setting of ejectors.
12. Core-pulling, unscrewing device and robot sequence programmed(hardware exclusive)
13. The toggle is lubricated with a high pressure, fixed volume lubrication system and warning message will display on screen when run out of lubrication.

Hydraulic system

1. Proportional power saving pressure and flow hydraulic system, which is power saving, fast cycle, low noise level and low maintenance cost.
2. Temperature and pressure indicator for monitor operation process.
3. Hydraulic and electrical parts are from famous international manufacturer.
4. High efficiency hydraulic system enhances performance.